Discharge Pipe Temperature Control - Daikin FLXS-BAVMB Service Manual

Control Specification
3.4

Discharge Pipe Temperature Control

Outline The discharge pipe temperature is used as the internal temperature of the compressor. If the
discharge pipe temperature rises above a certain level, the upper limit of frequency is set to
keep this temperature from going up further.
Detail
41
B˚C
C˚C
D˚C
Discharge pipe
temperature
Zone
Stop zone When the temperature reaches the stop zone, the compressor stops.
Drooping zone The timer starts, and the frequency is drooping.
Keep zone The upper limit of frequency is kept.
Up zone The upper limit of frequency is increased.
Reset zone The upper limit of frequency is canceled.
A (ºC) 110
B (ºC) 105
C (ºC) 101
D (ºC) 99
E (ºC) 97
SiBE05-722_B
Stop zone
A˚C
Drooping zone
Keep zone
Up zone
E˚C
Reset zone
(R13529)
Control
Function and Control