REMOVING THE MAGNETO
1. Remove:
• Magneto rotor nut
• Washer
NOTE:
• While holding the magneto rotor using magneto
holder "1", loosen the magneto rotor nut.
1
Magneto Holder
YSST-701
2. Remove:
• Magneto rotor "1"
(with the flywheel puller "2")
• Woodruff key
CAUTION:
To protect the end of the crankshaft, place an
appropriate sized socket between the fly-
wheel puller set center bolt and the crank-
shaft.
NOTE:
Make sure the magneto puller is centered over
the magneto rotor.
Magneto puller
YSST-702
MAGNETO AND STARTER CLUTCH
2
REMOVING THE STARTER CLUTCH
1. Remove:
• Starter clutch bolts "1"
NOTE:
• While holding the magneto rotor with the
magneto holder, remove the Starter clutch
bolts "1"
CHECKING THE STARTER CLUTCH
1. Check:
• Starter clutch rollers "1"
• Starter clutch spring caps "2"
• Starter clutch springs "3"
Damage/wear → Replace the starter clutch
assembly.
5-29
1
1