Yamaha YZF-R15 Service Manual page 137

NOTE:
There should be 3 mm of clearance"a" between
the handlebar grip and the grip end.
s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s
12.Check:
• Cable routing
NOTE:
Make sure the main switch lead, brake hose,
throttle cable, clutch cable, and handlebar
switch leads are routed properly.
13.Adjust:
• Clutch lever free play
Refer to "ADJUSTING THE CLUTCH CABLE
FREE PLAY" on page 3-11.
Clutch lever free play
10.0–15.0 mm
14.Adjust:
• Throttle cable free play
Refer to "ADJUSTING THE THROTTLE CA-
BLE FREE PLAY" on page 3-6.
Throttle cable free play
3.0–5.0 mm
4-40
HANDLEBARS