Yamaha YZF-R15 Service Manual page 59

1. Front brake hose
2. Throttle cable
3. Left handlebar switch lead
4. Clutch cable
5. Wire harness (to horn)
6. Ignition coil
7. Air filter case silencer hose
8. Sidestand switch lead
9. Coolant reservoir hose
10. Fuel tank breather hose
11. Coolant reservoir breather hose
12. Front left turn signal light coupler
13. Speed sensor lead
14. Wire harness (to clutch switch)
15. Front left turn signal light lead
16. Horn
17. Fuel hose
18. Fuel pump lead
19. Fuel sender lead
A. Fasten the left handlebar switch lead, wire harness
(to clutch switch), and clutch cable with a plastic
locking tie, making sure to align the white tape on
the leads and cable with the tie.
B. Fasten the sidestand switch lead, coolant reservoir
hose, and fuel tank breather hose with the plastic
clamp.
C. Fasten the sidestand switch lead, coolant reservoir
hose, and fuel tank breather hose to the left side
cowling bracket with the plastic clamp.
D. Fasten the wire harness (to clutch switch) and left
handlebar switch lead to the left radiator bracket
with a plastic locking tie, making sure to align the
white tape on the harness and lead with the tie,
and then route the harness and lead to the inside
of the clutch cable guide.
E. Fasten the grommet on the front brake hose with
the holder.
F . Route the throttle cable to the inside of the radiator
bracket and pass the cable through the guide on
the radiator cover.
2-40
CABLE ROUTING