Yamaha YZF-R15 Service Manual page 164

Disconnecting the leads and couplers
1
9 Nm (0.9 m
Order Job/Parts to remove
Negative battery lead/Positive battery lead
Engine oil
Coolant
Seat/Side panel/Front panel/Air filter case
Fuel tank
Throttle body/Intake manifold
Water pump breather hose/Radiator outlet
hose/Radiator inlet hose/Radiator
Air cut-off valve/Reed valve/Plate
Drive sprocket cover/Drive sprocket
1 Spark plug cap
5
2
6
kg, 6.5 ft Ib)
• •
10 Nm (1.0 m
ENGINE REMOVAL
3
3
kg, 7.2 ft Ib)
• •
10 Nm (1.0 m
Qty
CAUTION:
First, disconnect the negative battery
lead, and then the positive battery lead.
Refer to "CHECKING AND CHARGING
THE BATTERY" on page 3-25.
Drain.
Refer to "CHANGING THE ENGINE OIL" on
page 3-10.
Drain.
"CHANGING THE COOLANT" on page 3-14
Refer to "GENERAL CHASSIS" on page
4-1.
Refer to "FUEL TANK " on page 7-1.
Refer to "THROTTLE BODY" on page 7-4.
Refer to "RADIATOR" on page 6-1.
Refer to "AIR INDUCTION SYSTEM" on
page 7-9.
Refer to "CHAIN DRIVE" on page 4-60.
1 Disconnect.
5-2
7
8
4
kg, 7.2 ft Ib)
• •
Remarks