Yamaha YZF-R15 Service Manual page 106

NOTE:
Install the tyre and wheel with the mark"1" point-
ing in the direction of wheel rotation.
5. Install:
Speed sensor unit
l
NOTE:
Make sure the speed sensor and the
wheel hub are installed with the two projections
meshed into the two slots respectively.
6. Install:
Front wheel
l
NOTE:
Make sure the slot "a" in the outer tube fits over
the stopper "b" on the speed sensor unit.
7. Tighten:
Wheel axle
l
Wheel axle
60 Nm (6.0 m·kg, 43 ft·lb)
Make sure the brake hose is routed properly.
CAUTION:
Before tightening the wheel axle nut, push
down hard on the handlebar(s) several times
and check if the front fork rebounds smooth-
ly.
b
a
4-9
FRONT WHEEL
WARNING