Setting Up Ipl To Receive The File - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide

Setting Up IPL to Receive the File

The Initial Program Loader (IPL) can be set up on the terminal to download and receive files
two ways: via the TCM utility running on a host PC, or from a Compact Flash card inserted
in the terminal.
To download files to the terminal via the TCM utility running on a host PC, IPL can be set
up in manual mode, or allowed to run automatically to download several partitions in
sequence. To download files to the terminal from a Compact Flash card inserted in the
terminal, IPL must be set up in manual mode only.
Note: At any time in IPL, select the Previous menu item to return to the
previous menu. Select the Top menu item to return to the Initial
Program Loader main menu.
To set up IPL on the terminal:
1. Cold boot the terminal by pressing the Reset button inside the battery compartment
while holding down the Function key.
2. Within three seconds, press and hold any Trigger (Scan) key.
3. Continue to hold the Trigger (Scan) key until either the Initial Program Loader main
menu or No AC Power is detected! screen appears (see
• To manually select the partitions/applications to download, press either the Up
or Down arrow keys, within 10 seconds to turn the timer off.
Note: AC power must be applied before continuing in IPL. The "No AC
Power is detected!" screen appears when the terminal is not
connected to an AC power supply.
11-14
Figure 11-1).