PDT 8100 Series with Intel XScale Technology Product Reference Guide
Ping Tab
Figure 9-12. PDT 8146 NICTT Properties - Ping Tab
Use the Ping tab to send and receive ICMP ping packets across the network to the specified
IP address.
•
Enter an IP address as a dotted string (e.g., 122.78.3.141).
•
Select the size of packets sent from the Size drop-down menu.
•
Select Start Test to begin the continuous ping test. Select Stop Test to
terminate the ping test.
•
The average mega-bits per second, signal strength, data rate currently in use, test
statistics and round trip times are displayed for each test.
•
The associated access point's MAC address is also displayed.
•
The signal strength level and the data transmission rate are displayed in real-time
bar graphs.
9-18