PDT 8100 Series with Intel XScale Technology Product Reference Guide
Configuring the Cradle
Cradle Setup
Setup the CRD 8100-4200E as shown in
IP Address Configuration
The cradle must be configured with IP addresses to be used by the cradle and four slots.
Three methods of acquiring these addresses are provided in the cradle configuration:
•
6 DHCP Address mode (default)
•
1 DHCP NAPT Address mode
•
Static Address mode.
6 DHCP Address Mode (Default)
In this mode, the cradle's default mode, the cradle acquires six IP addresses dynamically
from a DHCP server. You must have a DHCP server or a DHCP relay agent on the same
subnet as the cradle. The server automatically provides the cradle with:
•
one IP address for the cradle
•
four IP addresses for the four cradle slots
•
one IP address for the expansion port.
4-20
Figure
Figure 4-13. Connecting the Cradle
4-13.
Ethernet Cable
To Ethernet hub