Aps Tab - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide

APs Tab

Figure 9-14. PDT 8146 NICTT Properties - APs Tab
The APs tab is only available in Infrastructure mode (selected on the Mode tab).
Use the APs tab with the Infrastructure operating mode to view access points with the same
ESSID as the adapter. View the AP MAC address, signal level and channel of known
access points.
• The currently associated access point's icon includes a radio wave radiating from
the antennae to indicate the associate status. Tap on an icon to display a menu:
• Select Set Mandatory to prohibit the adapter from associating with the specified
access point. The letter "m" displays on top of the access point's icon when this
option is selected.
• Select Set Roaming to allow the adapter to roam to this access point if it has a
better signal quality.
These settings are temporary and are not saved to the registry.
• Tap the Refresh button to update the list of the known APs.
9-20