Using The Vehicle Charging Cradle; (1950 Mah Battery Only) - Symbol PDT 8100 Series Product Reference Manual

Using the Vehicle Charging Cradle

(1950 mAh Battery Only)

To charge the battery in the terminal using the VCD 8100-R001 Vehicle Charging Cradle:
1. Ensure the cradle is connected to the vehicle's power source (refer to the
VCD 8100 -R001 Vehicle Cradle QRG, p/n 72-50978-xx, for power information).
2. Insert the terminal into the vehicle cradle
Figure 1-14. Inserting the Terminal into the Vehicle Cradle
3. The terminal begins to power itself through the cradle as soon as it's inserted. This
does not deplete the vehicle battery significantly.
If the cradle is connected to unswitched power, leaving the terminal in the
cradle for an extended period of time will eventually deplete the vehicle
battery.
See Charging the Main Battery and Memory Backup Battery for the First Time
13 and Recharging the Main Battery
battery. See LED Indicators
Caution
on page 1-13 for the times needed to fully charge the
on page 1-25 for battery charging indications.
(Figure 1-14).
Getting Started
on page 1-
1-21