Uninstallation - Danfoss CF-RC Instruction

Instruction
This indication of Alarm on the Remote Controller and the indication on the
Master Controller will continue until the error that caused the alarm has been
fixed.
An Alarms menu will be present at the top of the Menu list activated from the
start-up screen:
Activating this Alarms menu with OK provides access to an Alarm status
where you can see a description of the error causing the alarm Furthermore,
you can select the Alarm log to get specific information about the error caus-
ing the alarm and the time for its registration by the system. This Alarm log
saves the latest alarms for later access and easy system failure identification.
When no error is causing an alarm, you can access the Alarm log through the
Setup menu (see chapter 5.3).

6. Uninstallation

Resetting the Remote Controller, CF-RC – fig 1:
• At the same time, activate the Soft key 
selector
• The Remote Controller requests confirmation before resetting.
Confirmation with "yes" Resets the Remote Controller.
• By confirming Reset with "yes" the Remote Controller is now ready for instal-
lation to a Master Controller, CF-MC.
Note: Please see the Master Controller instruction for further details!
VI.UH.M4.1C

CF-RC Remote Controller
.
Produced by Danfoss Floor Heating Hydronics 03.2007
, the soft key 2 and the down