Program - Danfoss CF-RC Instruction

Instruction CF-RC Remote Controller

5.2 Program

GB
From the start-up screen, activate the:
Menu
Program
Program menu to view the two time programming options:
5.2.1 Period program:
With this program, you can set the room temperature for all Room Thermo-
stats during e.g. a holiday. The start and end date for the program is easily set
in a calendar by means of the up/down and left/right selectors (fig. - / )
and by confirming each setting with OK. The room temperature and the dura-
tion of the period program are illustrated and finally activated from a detailed
overview for the created program:
5.2.2 Setback program:
In the Program setback menu, you have the opportunity to divide the different
rooms into up to six different zones - each zone with up to three different setback
programs for reduced room temperature at different times during the day.
VI.UH.M4.1C Produced by Danfoss Floor Heating Hydronics 03.2007
9