Danfoss CF-RC Instruction page 11

Instruction CF-RC Remote Controller
Options:
Each zone has a screen showing the rooms included in the zone. This provides
access to an Options menu with an Add room function and three Setback
programs (up to).
Add room:
In this menu, all the rooms are followed by a ( ) indicating to what zone each
). As default, all the rooms are
room has been allocated (see figure below
assigned to Zone . If new zones are created, the rooms will be moved from
the zone to which they are allocated to the new zone (from zone  to zone 3 in
the figure below).
Program 1 - 3:
The Options menu also includes three possible setback programs for each
zone. By means of these, the seven days of the week can be divided into up to
three different setback programs with different days and setback periods for
each program. The procedure for creating or changing a program is the same
for all the three programs:
VI.UH.M4.1C Produced by Danfoss Floor Heating Hydronics 03.2007
0