Playback - Hyundai MSD 761 DRSU Instruction Manual

PLAYBACK

• Switch on the unit. /Put the unit in standby mode.
Note: Being in the standby mode uses a minimal amount of electricity, but ensures that
the components of the unit operate at maximum efficiency from the moment you start.
• Press repeatedly to select a signal source among DVD and TUNER(AM/FM) .
• Press repeatedly to switch to the available extra signal source USB or memory card, or to
return to the DVD mode.
• Press to open /close the disc tray.
• The digit keys can be used to input the corresponding numbers or make selection of a track
or a chapter of a disc, etc.
• Press to enter an item in the menu or to confirm your operation etc.
• The direction keys can be used to move the highlight or adjust the value of an item
in the menu .
• Press to enter/exit the setup menu.
• During playback, press to enter the GOTO menu. In the menu, use the direction key [UP]/
[DOWN] to select a setting item and press [ENTER] to enter the editing state, then
with the digit keys input a specific track, disc time, track time, chapter, title, chapter time
or title time to go to directly. Press it again to exit the GOTO menu.
• Press this button to enter/exit the program menu with which you can playback the contents
of a disc in your desired order. In the program menu, use the direction keys, digits keys
and [ENTER] to make a program list, then move the highlight to START and press [ENTER]
to start program playback. During program playback, press this button to enter the program
menu and the STOP is highlighted, press [ENTER] to cancel program playback.
ENG - 76