West Bend 41413 Instruction Manual page 4

CONTROL PANEL and FUNCTIONS
LCD DISPLAY: The display indicates when the appliance is ready for use. When the
appliance is first plugged in, there will be an audible beep and the default program is
displayed. "1 3:00" appears on the display. The "1" specifies which program is selected
(1-12 programs) and the "3:00" is the length of the program in hours: minutes. The
marking at the top of the display indicates the weight of the loaf selected (1.5 lb or 2 lb)
with 2 lb as the default. The other marking at the top of the display indicates the degree
of browning that is selected (light, medium, or dark) with medium as the default. As the
program proceeds the digits of the time displayed will decrease progressively indicating
remaining time.
"START/STOP" Button: The "START/STOP" button is used to start or cancel a
program. A short alert is heard with each press of the "START/STOP" button. Press
this button when the breadmaker is idle to start the program. When the breadmaker
is active, press and hold this button to cancel the program. When you
cancel the program, the breadmaker will return to its default settings for the chosen
menu selection. All customized settings will be lost if the program is cancelled.You
must set all desired program settings before starting the program. The program
cannot be changed after the cycle has begun, unless you cancel the cycle.
"TIME +" and "TIME -" Buttons: The "TIME +" and "TIME -" buttons are used to set
a delayed program end time. Only the following programs can be used with the delay
timer: (1) "Basic," (2) "French," (3) "Whole wheat," (4) "Gluten free," (5) "Sweet," (7)
"Sandwich," (8) "Mix," and (9) "Dough." The (6) "Super rapid," (9) "Jam," (11) "Cake,"
and (12) "Bake" programs can not be started with the delay timer. The delay hours
and minutes will be added to the preprogrammed times for the specific program. The
time indicated in the display is the time until the end of the cycle. The maximum time
delay is 13 hours per program. Note: When delay start time has been selected, press
"START/STOP" button. As time counts down, the " : " will blink to indicate that it is
working.
DELAY START: The maximum time delay is 13 hours per program.
Example: It is 8:30 p.m. and you would like the bread ready for the next morning at 7:00
a.m. Determine the time difference, 7:00 a.m. is 10 hours and 30 minutes ahead of 8:30
p.m. Press the "TIME +" or "TIME -" buttons until 10:30 appears in the display.
NEVER use the time delay function when using perishable ingredients such as
milk, eggs, fruit, yogurt, etc.!
"COLOR" Button: "COLOR" cycles to select the crust darkness: LIGHT, MEDIUM,
and DARK. The default color is MEDIUM.
English - 4