Motorola DCX3200 Installation Manual page 53

4 DIAGNOSTICS
Field
Service
Status
ID
CH
Tuned
Frequency
VCT ID
SOC
CCI
APS
RC Flag
CIT
DRM
RS
Description
Service number from the secure processor. It is a one bit value; 0 or 1.
Service status from the secure processor. It is a decimal value from 0 to 3.
Service ID from the secure processor. It is a hexadecimal value. First 2 bytes
indicate MPEG service number and the last byte indicates another unique
identifier.
Current Channel the set-top is tuned to.
(Digital channels only) The center RF carrier frequency for the digital service. It
can be from 54 to 860 MHz.
Virtual Channel Table ID
Selectable Output control enabled or disabled
The copy control information:
00 — copy free
01 — no more copies
10 — copy once
11 — never copy
N/A — the value is invalid or cannot be retrieved
The Analog Protection System; for example, Macrovision:
00 — No Macrovision
11 — Type 3 Macrovision
N/A — the value is invalid or cannot be retrieved
Displays whether the broadcast flag is present:
0 — no flag/not defined
1 — the flag is present/enabled
N/A — the value is invalid or cannot be retrieved
The constrained image trigger, as delivered in the PRK or the Set DRM API:
1 — set
0 — not set
N/A — the value is invalid or cannot be retrieved
The digital rights management valid flag bit:
1 — set
0 — not set
N/A—the value is invalid or cannot be retrieved
The retention state:
Forever, 1 week, 2 days, 1 day, 12 hours, 6 hours, 3 hours, 90 minutes, or
Not Defined
N/A — the value is invalid or cannot be retrieved
45