Connecting A Standard-Definition Tv (Sdtv) And Vcr/Dvd Recorder - Motorola DCX3200 Installation Manual

3 INSTALLATION
Depending on the TV's inputs:
1. If possible, use the S-Video and audio connects on the DCX set-top.
2. If the TV has no S-Video input, use the composite video and audio connectors on the
DCX set-tops.
3. If the TV has an RF input only, use the RF out connector on the DCX set-top. The RF
connection carries video and audio.
Note: S-Video and Composite video require separate audio connections.

Connecting a Standard-Definition TV (SDTV) and VCR/DVD Recorder

1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the
DCX3200 Series set-top and the INPUT AUDIO L and R connectors on the stereo
VCR.
2. Connect a video cable to the VIDEO OUT connector on the DCX3200 Series set-top
and the INPUT VIDEO connector on the stereo VCR.
3. Connect a stereo audio cable to the OUTPUT AUDIO L and R connectors on the
Stereo VCR and the INPUT AUDIO LEFT and RIGHT connectors on the Stereo TV
(SDTV).
4. Connect a video cable to the output video connector on the stereo VCR and the
input video connector on the Stereo TV (SDTV).
Note: You can also connect using the S-Video connectors if supported by the stereo
VCR.
These video connection methods do not support HD video. If there is an HDTV, see
Connecting HDTV — Separate Video/Audio Connections.
17