Motorola DCX3200 Installation Manual page 36

3 INSTALLATION
1. With an HDMI™ connection in place, power off the DCX3200 and then immediately
press the
menu. Move the cursor next to the "Additional HDMI Settings" option and press the
► key.
An example of the Additional HDMI™ Settings menu
The Additional HDMI™ Settings menu options are:
Setting
HDMI/DVI
Mode
Color Space
key on the remote control. This will display the main User Settings
MENU
Description
The HDMI/DVI mode settings allow you to optimize the HDMI™ output to
work with both DVI-equipped televisions and HDMI™ equipped televisions.
By default, this option is set to HDMI. The options are used as follows:
•
HDMI™ designates that an HDMI™ television is connected to the
DCX3200.
•
DVI designates that a DVI television is connected to the DCX3200 (via
an HDMI-to-DVI adapter).
The Color Space setting allows you to adjust the color space used by the
DCX3200 to generate the video signals on the HDMI™ output. By default,
this option is set to YCC 4:4:4. The options are used as follows:
•
YCC 4:4:4 designates that the DCX3200 will generate video signals
within the YCC color space.
•
RGB designates that the DCX3200 will generate video signals within
the RGB color space.
Note 1: Adjusting these settings could result in a loss of video. Only a
professional installer or someone with a good working knowledge of the
color spaces supported by the TV should change this setting.
28