Connecting An A/V Receiver - Audio - Motorola DCX3200 Installation Manual

3 INSTALLATION
Connecting an A/V Receiver — Audio
There are several options available for audio connections to the A/V receiver:
•
Digital audio (OPTICAL S/PDIF)
•
Digital audio (COAXIAL S/PDIF)
•
Stereo audio (AUDIO L and R)
If the A/V receiver supports it, the optical (S/PDIF) or coaxial (S/PDIF) audio outputs may
be used in place of the stereo audio outputs (AUDIO L and R). These outputs offer a
higher level of audio quality, including support for Dolby
•
Digital audio optical (S/PDIF) — Connect the optical cable to the digital audio
optical connector on the DCX set-top and the optical connector on the A/V receiver.
•
Digital audio coaxial (S/PDIF) — Connect the digital audio cable to the digital audio
connector on the DCX set-top and the DIGITAL INPUT COAX connector on the A/V
receiver.
•
Stereo audio — Connect the stereo audio cable to the AUDIO L and R connectors
on the DCX set-top and the AUDIO LEFT and AUDIO RIGHT connectors on the A/V
receiver.
For information on configuring the DCX set-top settings, see
Video, and Closed Caption Settings.
14
®
Digital audio.
Configuring the Audio,