Connecting Hdtv - Separate Video/Audio Connections; Cable In; Dvi; Component Video (Ypbpr) - Motorola DCX3200 Installation Manual

3 INSTALLATION
Connecting HDTV — Separate Video/Audio Connections

Cable In

Connect an RF coaxial cable to the cable wall outlet and the Cable In connector on the
DCX set-top.

DVI

If the TV has a DVI input, use the DVI connection for the video:
•
Connect a HDMI-to-DVI adapter or cable to the HDMI™ out connector on the DCX
set-top and the DVI connector on the TV.
Note: A DVI connection supports only the video connection between the DCX set-top
and the HDTV. To connect your audio connections with your TV speakers, go to Audio
section below. To connect the audio connections for an A/V receiver, go to
the DCX Set-top to an A/V Receiver —

Component Video (YPbPr)

Connect the component video cables to the Y, Pb, and Pr connectors on the HDTV and
the DCX set-top.
Note: This connection supports only the high-definition video connection between the
DCX set-top and the HDTV. To connect your audio connections with your TV speakers, go
to Audio section below. To connect the audio connections for the HDTV, go to
Connecting the DCX Set-top to an A/V Receiver —

Audio

If the TV does not have digital audio inputs:
•
Connect the stereo audio cable to the AUDIO L and R connectors on the DCX3200
Series set-top and the audio left and audio right connectors on the HDTV.
If the TV supports a digital audio input:
•
If the equipment supports it, use the digital audio OPTICAL S/PDIF or COAXIAL
S/PDIF outputs instead of the AUDIO L and R outputs. S/PDIF offers better audio
quality, including support for Dolby
For more information on configuring the DCX setup-top settings, see
Video, and Closed Caption
Audio.
®
Digital audio.
Settings.
12
Audio.
Configuring Audio,
Connecting