Alarm Input Setting - Sanyo VCC-9300 Instruction Manual

ALARM SETTING
A Alarm input setting
1
In the MAIN MENU, select ON for ALARM and press the
ENTER button.
The ALARM screen will appear.
2
Use the joystick lever (d or c) to select the external
alarm input number (Ex: 3), then press the ENTER button.
The ALARM IN 3 setting screen will appear.
ENTER
External alarm input polarity setting
(POLARITY)
3
Use the joystick lever (d or c) to select POLARITY
between "NO" and "NC".
Available settings:
•
NO: Normal open (Normally open so closed condition is
detected as input.)
•
NC: Normal closed (Normally closed so open condition is
detected as input.)
English
ALARM
ALARM IN 3 ‚
MOVE MODE OFF
ALARM OUT OFF
ALARM IN 3
POLARITY NO
MOVE OFF
MOTION OFF
ALARM OUT OFF
LINE OUT OFF
DURATION 5S
PRESET OFF
MENU BACK
ALARM IN 3
POLARITY NO
MOVE OFF
MOTION OFF
ALARM OUT OFF
– 41 –
Adjust the alarm input settings for ALARM IN 3 as
needed.
Move to preset setting (MOVE)
After activation of an alarm, the camera moves to the PRESET
POSITION with the same number as the alarm number.
Use the joystick lever (j or l) to move the cursor to MOVE,
then use the joystick lever (d or c) to select the preset move
option.
Available settings:
•
ON: When alarm is received, the camera moves to the
PRESET POSITION with the same number as the alarm
number.
•
OFF: Does not move to a PRESET POSITION.
Motion sensor input setting (MOTION)
Matches information from the camera's motion sensor and the
external alarm and outputs it.
Use the joystick lever (j or l) to move the cursor to MOTION,
then use the joystick lever (d or c) to select the input.
Available settings:
•
OFF: Does not output a motion sensor alarm.
•
AND: Outputs an alarm when an external alarm input and
motion sensor alarm are detected at the same time.
1 2
DURATION
ALARM OUT
1
External alarm input
2
Move to preset position
3
Motion sensor detection
When an external alarm input is received, the camera
moves to the preset position for the alarm input. After
moving to the position, an alarm is output if there is
detection by the motion sensor.
4
Returns to auto mode
•
OR: Outputs an alarm if either an external alarm or a motion
sensor alarm is detected.
Note:
•
The "AND" and "OR" sensor input options are only possible
when MOVE is set to "ON".
•
When MOVE is set to "OFF", MOTION SENSOR will
automatically be set to "OFF".
3 4
ALARM TIME