Auto Mode Settings; Auto Mode Item Flow - Sanyo VCC-9300 Instruction Manual

AUTO MODE SETTINGS

There are 3 types of automatic panning available in AUTO MODE: Sequential pan (SEQ), Tour mode (TOUR), and Auto pan (PAN).

AUTO MODE item flow

MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SEQ ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
ENTER
English
A
SEQ; Sequential pan setting (See p36)
The SEQ function offers 2 types of sequential automatic display,
smallest to larger preset position number (STEP) or by a random
selection method unique to this device (RANDOM). It also allows
setting of pause times and pan times for each PRESET POSITION.
This function can be activated by pressing the SEQ and + buttons on
the CAMERA keypad of the system controller.
SEQUENCE
ORDER STEP
PAUSE TIME 5S
[SEQ SPEED]
15
MENU BACK
B
TOUR; Tour mode setting (See p36)
The TOUR function records an image track of all camera pan, tilt and
zoom operations done within a 30 second period and then allows
surveillance of this recorded image track. Two 30 second image tracks
can be recorded, TOUR 1 and TOUR 2. In addition, TOUR 1 and
TOUR 2 can be combined to create a separate 60 second image track.
When a W track is created, stored data for TOUR 1 and TOUR 2 is
cleared. To do this, set TOUR to "W".
The image track can be activated by pressing the TOUR and + buttons
on the CAMERA keypad of the system controller.
TOUR
TOUR 1
TRACE OFF ‚
MENU BACK
C
PAN; Auto pan setting (See p37)
The PAN function stores a start point and an end point and then pans
between them in a loop.
The following options are available for loop operation.
• Pause time can be set for the start/end points.
• Pan direction can be set to either right or left.
• Speed can be set for the pan motion (time of pan).
The loop can be activated by pressing the PAN and + buttons on the
CAMERA keypad of the system controller.
AUTO PAN
POSITION START‚
PAUSE TIME 3S
DIRECTION LEFT
[PAN SPEED]
15
MENU BACK
– 35 –
Memory
TOUR1: 30 seconds TOUR2: 30 seconds
W: 60 seconds (TOUR1+2)
CAM-1 FLOOR-2 CAM-1 FLOOR-2 CAM-1 FLOOR-2 CAM-1 FLOOR-3 CAM-1 FLOOR-3 CAM-1 FLOOR-3 CAM-1 FLOOR-4 CAM-1 FLOOR-4 CAM-1 FLOOR-4
TOUR1: 30 seconds
The start location
The end location