C Electronic Shutter Setting - Sanyo VCC-9300 Instruction Manual

CAMERA SETTINGS
Electronic SHUTTER setting
C
Sets the electronic shutter to either the fast shutter speed mode
(SHORT) or the slow shutter speed mode (LONG).
Fast shutter speed (SHORT) mode setting
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
SHUTTER, then use the joystick lever (d or c) to select
the speed mode for the electronic shutter. (Ex: SHORT)
Then press the ENTER button.
The ES SETTING screen will appear and 60 (1/60 sec) will be
blinking. This setting is suitable for fast moving target objects.
ENTER
4
Use the joystick lever (d or c) to select a electronic
shutter speed.
Available settings: 60, 100, 250, 500, 1000, 2000, 4000,
10000
Note: SHORT mode cannot be set if SENSE UP or IRIS is "ON".
English
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER SHORT‚
MOTION OFF
APERTURE ON ‚
AGC ON ‚
ES SETTING
SHUTTER SPEED 60
– 29 –
Slow shutter speed (LONG) mode setting
1
Use the joystick lever (j or l) to move the cursor to
SHUTTER, then use the joystick lever (d or c) to select
the speed mode for the electronic shutter. (Ex: LONG)
Then press the ENTER button.
The ES SETTING screen will appear and x1 (1/60 sec) will be
blinking. This setting is suitable for dark target objects.
ENTER
Note: When a shutter speed is set, it can also be adjusted with the
"ELS" button on the system controller.
2
Use the joystick lever (d or c) to select a electronic
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32 (Field times
shown as multiples.)
3
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
Note:
SHUTTER (LONG) cannot be set if any of the following settings is
active.
•
MOTION: ON
•
IRIS: AUTO item SENSE UP (ON) or MANU item El (ON)
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER LONG ‚
MOTION OFF
APERTURE ON ‚
AGC ON ‚
ES SETTING
SHUTTER SPEED x1
PRESET OFF
MENU BACK