Ggamma Correction Setting - Sanyo VCC-9300 Instruction Manual

CAMERA SETTINGS
When OFF is set
1
Use the joystick lever (d or c) to select OFF, then
press the ENTER button.
The GAIN SETTING screen will appear, and "0dB" will be
blinking.
Available settings: 0 – 30dB
2
Use the joystick lever (d or c) to adjust the gain.
4
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING 1 screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
GAIN SETTING
0·
PRESET OFF
MENU BACK
– 34 –
GAMMA correction setting
G
In addition to turning gamma correction ON or OFF, contrast
sensitivity can be boosted at 2 levels.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to ON
for GAMMA, then use the joystick lever (d or c) to select
the gamma correction.
Available settings:
•
OFF: No gamma correction
•
ON: Gamma correction (γ = 0.45)
•
SMART 1: Correction 1
•
SMART 2: Correction 2 (improves contrast for dark
locations)
Note: When using SMART 1 or SMART 2, the target object may be
too bright, so determine which setting is better for the target
object.
4
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The CAMERA SETTING screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU BACK
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
English