A Preset Position Settings (Preset No.); B Deleting Preset Positions (Delete) - Sanyo VCC-9300 Instruction Manual

PRESET POSITION SETTINGS

A Preset position settings (PRESET NO.)

Example: Establishing a surveillance location for
PRESET NO. 3.
1
In the MAIN MENU, select SET for PRESET POSITION and
press the ENTER button.
The PRESET NO. SELECT screen will appear.
ENTER
2
Use the joystick lever (j or l) to select number 3 and
press the ENTER button.
The PRESET SETTING screen will appear, and the number 3
will be blinking in the PRESET NO. field.
ENTER
3
Press the ENTER button.
The menu setting screen will be replaced by an image of the
surveillance location.
4
Use the joystick lever (j l d c) to determine the
position to be stored for preset position 3.
Moving the joystick lever will move the camera so that the
desired surveillance location can be found.
Note:
•
Storage of preset positions can be completed on either the
camera's menu or from the system controller.
•
When auto flip is set to ON for a preset position, the preset
location may slip a little. In this case, reset the setting to correct
the problem.
English
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE PAN ‚
AUTO FLIP OFF
ALARM OFF
PRESET NO.SELECT
1:0 11:X 21:X 31:X
2:X 12:X 22:X 32:X
3:X 13:X 23:X 33:X
4:X 14:X 24:X 34:X
5:X 15:X 25:X 35:X
6:X 16:X 26:X 36:X
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
TITLE OFF
PRESET SETTING PRESET SETTING PRESET SETTING
SET SET SET ‚ ‚
– 11 –
5
Press the ENTER button again.
The menu setting screen will reappear. Repeat steps 2 – 4 to
store other preset positions.
Set the corresponding TITLE, CAMERA VIEW and PAUSE
TIME for each of the new PRESET NO.
Note: When several cameras are used together, the CAMERA ID
menu item can be used to display information distinguishing
which camera is in use. Refer to "Camera ID setting" for
further information. (See p12)

B Deleting preset positions (DELETE)

Example: Deleting preset position 3
1
In the PRESET NO. SELECT screen, select preset number 3
and press the ENTER button.
The PRESET SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to SET
for DELETE and press the ENTER button.
The confirmation message "OK?" will appear under SET.
ENTER
3
Press the ENTER button again.
Information stored for the surveillance location will be deleted.
The signal letter for the corresponding preset number will
change from "0" to "X" in the PRESET NO. SELECT screen.
ENTER
PR
1:0
2:X
3:0
4:X
5:X
6:X
7:X
8:X
9:X
10:X
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
OK?
TITLE OFF
CAMERA VIEW OFF
PAUSE TIME 3S
MENU BACK
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
TITLE OFF
PRESET NO.SELECT
1:0 11:X 21:X 31:X
2:X 12:X 22:X 32:X
3:X 13:X 23:X 33:X
4:X 14:X 24:X 34:X
5:X 15:X 25:X 35:X
6:X 16:X 26:X 36:X
7:X 17:X 27:X 37:X
8:X 18:X 28:X 38:X
9:X 19:X 29:X 39:X
10:X 20:X 30:X 40:X