Configuring Auto White Balance Control Mode - Sanyo VCC-HD2500P Manual

Drag the mouse over the live video image to select the area you want to mask.
2
The masked area is indicated by blue-bordered grid cells each containing the letter "M".
You can mask more than one portion of the live image.
You can click one grid cell after another to set or cancel the masked area cell by cell.
To deselect a block of grid cells in the masked area, right-click one of grid cell and drag the mouse.
Click and then
3 SET
The settings are saved and you return to the sub menu.
Use AWC if auto trace white balance (ATW) does not reproduce a natural white balance.
AWC allows you to automatically adjust the white balance by simply clicking
toward a white wall, white paper and the like.
1
In [WHITE BALANCE], select "AWC".
2
Direct the camera lens toward a white wall, white paper and the like and, in [AWC LOCK],
click .
SET
If the white balance adjustment does not reproduce desirable results, click
You need to follow the above steps also to re-adjust the white balance when the lighting conditions have been
changed.
To fine-tune the white balance after this adjustment, in [GO TO MWB], click
You can set the color temperature to a fixed value.
.
BACK
Working with Administrator Configuration Screens 23/66
SET
with the camera lens directed
SET again.
SET .