Registering Monitoring Positions <Preset Position - Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome Camera Instruction Manual

Registering Monitoring Positions <PRESET POSITION>
You can register the position information of a camera such as its angle or zoom (maximum 16 positions).
You can change the monitoring angle easily as required.
1
Select the <PRESET POSITION> number (No. 1 –
16) to register and press the SET button.
CAMERA
·PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
·PRESET PASSWORD
LANGUAGE
POSITION
OPTION
RThe "PRESET NO." screen appears.
2
Set <PRESET POSITION> to "ON" and press the
SET button.
·PRESET POSITION
PRESET ID
SKIP
·PRESET
ON
POSITION
RThe "PAN/TILT" screen appears.
• "PRESET NO.1" cannot be turned OFF.
SET
SET y
R
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
SET
PRESET NO.1
R
ON y
OFF
OFF
3
Set angle with the Select button and press the
SET button.
Tilt
Pan Pan
Tilt
MEMO:
Pan, tilt, and zoom settings are performed on the same screen during
remote operation through a hard disk recorder or controller.
Press the SET button to switch over between pan/tilt and zoom
operations.
4
Set zoom with the Select button and press the
SET button.
Wide Tele
RReturns to the "PRESET NO." screen.
For accessing the main menu, see pages 7 – 8.
PAN/TILT
SET
R
ZOOM
SET
R
28