Ethernet Interface - Datalogic DX6400 Reference Manual

2
Figure 33 – DX6400/DX6500 RJ45 Female Modular Connector
This interface and the connector pinout (see the following table) are IEEE 802.3 10 BaseT
and IEEE 802.3u 100 Base Tx compliant.
Pin
1
2
3
6
4, 5, 7, 8

Ethernet Interface

The Ethernet interface (NIC) can be used for TCP/IP communication with remote or local
host computer by connecting the scanner to a LAN as well as with a host PC directly
connected to the scanner.
The following is an example of a connection to a LAN through a Hub using a straight through
cable:
22
RJ45 Modular Jack Pinout
Name Function
TX + Transmitted data (+)
TX - Transmitted data (-)
RX + Received data (+)
RX - Received data (-)
N.C. Not connected
DS6400
TX+ 1
2
TX-
3
RX+
n. c.
4
n. c. 5
6
RX-
n. c. 7
n. c.
8
n. c. = not connected
Figure 34 – Straight Through Cable
8
1
HUB / SWITCH
1
2
3
4
5
6
7
8
DX6400/DX6500