On-Board Ethernet Interface; User Interface - Serial Host - Datalogic Matrix 300 Reference Manual

CBX ELECTRICAL CONNECTIONS

4.7 ON-BOARD ETHERNET INTERFACE

The on-board Ethernet Interface can be used for TCP/IP communication with a remote or
local host computer by connecting the reader to either a LAN or directly to a host PC. There
is no need to use a crossover adapter since Matrix 300™ incorporates an auto-cross
function.
A CAB-ETH-M0x cable can be used to connect to a LAN.
On the Matrix 300™ Ethernet interface the following communication channels are available:

Data Socket

Image Socket

WebSentinel Socket

Image FTP Client

HTTP Server

EtherNet/IP

Profinet IO

Modbus TCP
For further details refer to the Ethernet Folder in the VisiSet™ Help On Line and to the
"Matrix Ethernet Service Guide.pdf" document provided as supplementary documentation.

4.8 USER INTERFACE - SERIAL HOST

The following table contains the pinout for standard RS232 PC Host interface. For other user
interface types please refer to their own manual.
Pin
2
3
5
7
8
RS232 PC-side connections
5
1
6 9
9-pin male connector
Name
RX
TX
GND
RTS
CTS
1
14
25-pin male connector
Pin Name
3 RX
2 TX
7 GND
4 RTS
5 CTS
4
13
25
67