Fieldbus Network - Datalogic DX6400 Reference Manual

INSTALLATION
Master/Slave Models
When On-Line operating mode is used, the reader is activated by an External Trigger
(photoelectric sensor) when the object enters its reading zone. In the following case, the
signal is passed to the DX6400/DX6500 by the C-BOX 100, which also supplies the system.
DX6X00
**P.S.
* Presence Sensor connected to External Trigger input.
Fieldbus Models
In this case no External Trigger is used and the C-BOX 100 only supplies the reader. The
DX6400/DX6500 Ethernet model is connected to a fieldbus remote Host. It can be activated
by a signal generated by the remote Host or be always active if working in Automatic
operating mode.
* C-BOX 100
PG6000
* P.S. (Presence Sensor) connected to External Trigger input.
CAB600X
* C-BOX 100
PG6000
Figure 38 – Point-to-Point for Master/Slave Models
CAB601X
**P.S.
Figure 39 – Point-to-Point for Fieldbus Models
Fieldbus
Network
DX6X00
2
Local Host
Remote Host
27