Table of Contents
Advertisement
ELECTRICAL CONNECTIONS
ON-BOARD ETHERNET INTERFACE
The on-board Ethernet Interface can be used for TCP/IP communication with a remote
or local host computer by connecting the reader to either a LAN or directly to a host PC.
There is no need to use a crossover adapter since Matrix 220 incorporates an auto-cross
function.
A CAB-ETH-X-M0x cable can be used to connect to a LAN.
On the Matrix 220 on-board Ethernet interface the following communication channels
are available:
•
•
•
•
The following Fieldbus protocols are also available over the on-board Ethernet inter-
face:
•
•
•
For further details refer to the Help On Line page of the Reading Phase step (Channels)
and (Fieldbuses) in DL.CODE.
The following IoT protocol is also available over the on-board Ethernet interface:
•
For further details, refer to "
92
MATRIX 220
TCP Client
TCP Server
UDP Channel
FTP Client
EtherNet/IP
PROFINET IO
Modbus TCP Client
OPC UA
OPC UA protocol" on page 94
.
Advertisement
Table of Contents
