On-Board Ethernet Interface; User Interface - Serial Host - Datalogic Matrix 320 Product Reference Manual

ON-BOARD ETHERNET INTERFACE

The on-board Ethernet Interface can be used for TCP/IP communication with a remote
or local host computer by connecting the reader to either a LAN or directly to a host PC.
There is no need to use a crossover adapter since Matrix 320 incorporates an auto-cross
function.
A CAB-ETH-X-M0x cable can be used to connect to a LAN.
On the Matrix 320 on-board Ethernet interface the following communication channels
are available:
•
•
•
•
The following Fieldbus protocols are also available over the on-board Ethernet inter-
face:
•
•
•
•
•
For further details refer to the Help On Line page of the Reading Phase step (Channels)
and (Fieldbuses) in DL.CODE.

USER INTERFACE - SERIAL HOST

The following table contains the pinout for standard RS232 PC Host interface. For other
user interface types please refer to their own manual.
Pin
2
3
5
TCP Client
TCP Server
UDP Channel
FTP Client
EtherNet/IP
PROFINET IO
Modbus TCP Client
Modbus TCP Server
SLMP
9-pin male connector
Name
RX
TX
GND
RS232 PC-side Connections
Pin
3
2
7
ON-BOARD ETHERNET INTERFACE
25-pin male connector
Name
RX
TX
GND
PRODUCT REFERENCE GUIDE
101