Rear View; Installing Catalyst - DuraLabel Catalyst User Manual

REAR VIEW

1. AC power socket
2. Rear, face up stacker
3. USB-B interface
When the rear paper stacker is folded down, paper exits the printer through the rear
of the printer and is stacked here face up. This is mainly used for heavy print media.
When used in conjunction with the multi-purpose feed tray, the paper path through
the printer is essentially straight. This avoids bending the paper around curves in the
paper path.

6.2 Installing Catalyst

NOTE: Administrator rights may be necessary to install a printer and/or print driver
on your system. If you are installing Catalyst as a network printer you will also
need network settings and an ethernet cable to complete the installation process.
Should you need assistance, please contact your Systems Administrator.
If you no longer have your Catalyst CD, you may also
download drivers from DuraLabel.com.
Connect the power supply from the Catalyst to an
electrical outlet and position Catalyst near an available
USB port on your PC. Do not plug Catalyst into the USB
port until instructed to do so.
800.788.5572
1
DuraLabel.com
4. Network interface
* The Network Interface may have a protective
"plug" which must be removed before
connection can be made.
GettinG started
2
3
4
*
Catalyst CD splash screen -
select Install Driver option
9