Ppr Emulation Menu - DuraLabel Catalyst User Manual

FX EMULATION (continued)
LEFT MARGIN
TOF POSITION
FORM LENGTH
LINE LENGTH
CR FUNCTION
WHITE PAGE SKIP
LINE PITCH
ZERO CHARACTER
LETTER 0 STYLE
SYMBOL SET
CHARACTER SET
PPR EMULATION
This menu controls settings effective when the printer is operating in PPR emulation
mode.
ITEM
CHARACTER PITCH
TEXT HEIGHT
FIT TO LETTER
LEFT MARGIN
TOF POSITION
FORM LENGTH
800.788.5572
0.0INCH ~ 1.0INCH
0.0INCH ~ 1.0INCH
11 INCH
11.7 INCH
12 INCH
80 COLUMN; 136
COLUMN
CR / CR+LF
OFF / ON
6 LPI; 8 LPI
NORMAL
SLASHED
DISABLE
ENABLE
IBM-437
(Default Symbol Set only shown)
SET-1
SET-2
SETTINGS
10 CPI; 12 CPI;
17 CPI; 20 CPI;
PROPORTIONAL
SAME
DIFF
DISABLE
ENABLE
0.0INCH ~ 1.0INCH
0.0INCH ~ 1.0INCH
11 INCH
11.7 INCH
12 INCH
DuraLabel.com
Specifies the distance of print from the left
hand edge of the paper.
Specifies the distance of print from the top
edge of the paper.
Specifies the length of paper.
Specifies the number of characters per line.
Selects whether a received carriage return
character (0Dh) also causes a line feed.
Selects whether blank pages are printed or
not.
Specifies the line spacing.
Sets the zero to be slashed or unslashed.
Specifies the style that replaces 9BH with
letter o and 9DH with a zero
Specifies a symbol set.
Specifies a character set.
EXPLANATION
Specifies character pitch in IBM PPR
emulation.
Sets the height of a character. SAME:
Regardless of CPI, same height DIFF: As CPI,
character heights vary.
Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines), in
the LETTER-size printable area.
Specifies the distance of print from the left
hand edge of the paper.
Specifies the distance of print from the top
edge of the paper.
Specifies the length of paper.
Menu functions
43