DuraLabel Catalyst User Manual page 22

Loading PaPer
NOTE:
◦ If you have two trays and you are printing from the Tray 1, you can pull out the
Tray 2 during printing to reload it. However, if you are printing from the Tray 2,
do not pull out the Tray 1. This will cause a paper jam.
◦ For face down printing, make sure the face up (rear) stacker (a) is closed (the
paper exits from the top of the printer). Stacking capacity is approximately 150
sheets, depending on paper weight.
◦ For face up printing, make sure the face up (rear) stacker (a) is open and
the paper support (b) is extended. Paper is stacked in reverse order and tray
capacity is approximately 100 sheets, depending on paper weight.
◦ Always use the face up (rear) stacker for heavy paper (card stock, etc.).
result in a paper jam.
22
Do not open or close the rear paper exit while printing as it may
a
b
DuraLabel.com 800.788.5572