DuraLabel Catalyst User Manual page 21

3. Load paper (letterhead face down and top edge towards the front of the printer),
as shown.
b
4. Adjust the rear stopper (a) and paper guides (b) as tight as possible to the size
of paper being used.
5. Close the paper tray gently.
To prevent paper jams:
• Do not leave space between the paper and the guides and rear stopper.
• Do not overfill the paper tray. Capacity depends on the type of paper stock.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the same time.
• Close the paper tray gently.
• Do not pull the paper tray out during printing (except as described in the
following note for Tray 2).
800.788.5572 DuraLabel.com
a
Loading paper
21