DuraLabel Catalyst User Manual page 55

ADMINISTRATOR MENU (continued)
ITEM
OP MENU
(cont.)
CONFIG.
MENU
800.788.5572
SETTINGS EXPLANATION
USB MENU ENABLE
DISABLE
NETWORK MENU ENABLE
DISABLE
MEMORY MENU ENABLE
DISABLE
SYS ADJUST ENABLE
MENU DISABLE
MAINTENANCE ENABLE
MENU DISABLE
USAGE MENU ENABLE
DISABLE
NEARLIFE STATUS ENABLE
DISABLE
LIFE WARNING ENABLE
DISABLE
NEARLIFE LED ENABLE
DISABLE
ECO MODE ON
OFF
DuraLabel.com
Set up ENABLE/DISABLE condition for USB MENU category.
If DISABLE is selected, USB MENU category of
USERS MENU will not appear.
Set up ENABLE/DISABLE condition for NETWORK
MENU category.
If DISABLE is selected, NETWORK MENU category of
USERS MENU will not appear.
Set up ENABLE/DISABLE condition for MEMORY ME
NU category.
If DISABLE is selected, MEMORY MENU category of
USERS MENU will not appear.
Set up ENABLE/DISABLE condition for SYS.ADJUST
MENU category.
If DISABLE is selected, SYS.ADJUST MENU category
of USERS MENU will not appear.
Set up ENABLE/DISABLE condition for
MAINTENANCE MENU category.
If DISABLE is selected, MAINTENANCE MENU
category of USERS MENU will not appear.
Set up ENABLE/DISABLE condition for USAGE
MENU category.
If DISABLE is selected, USAGE MENU
category of USERS MENU will not appear.
Set LCD panel control at the time of near-life
warning for drum, fuser and belt.
Enable: Display a near-life warning.
Disable: Do not display a near-life warning.
If DISABLE is selected, the printer does not display
life warning after cover opening and closing
Display Condition: NEARLIFE STATUS is set to
DISABLE.
Enables/disables illumination of front panel LED
when "near-end-of-life" warning of a toner, drum,
fuser, or belt occurs. Attention LED is lit when
setting is enabled, inhibited when disabled.
When ON, if the machine is in power save mode
and you send a small print job (1 or 2 pages), the
machine will print the job without warming the fuser
to the "normal" operating temperature beforehand.
When you change the setting and exit the Admin
Menu, the machine will power cycle then the
following message is displayed "PLEASE POWER
OFF/ON". Switch the power off then turn the
machine back on.
Menu functions
55