Connect Right Squat Cable - Bowflex Xtreme 2 se Assembly Manual

10
8
6
9
7
19. Cable and pulley routing –
Connect right Squat Cable through the floating and Main Assembly pulleys
Slide the Right Squat Frame Pulley (6) to the furthest back hole, as indicated in Figure 19.
Unwrap the Right Squat Cable from the (6) Pulley and guide the Cable, threading under and through the Rear Cross Bar
Pulley (7), and up through the Floating (8) Pulley. Follow the arrows as indicated in Figure 19.
Continue to guide the Cable down through the Inner Right Frame Rail Pulley (9), up through the Right Pulley Arm Pulley (10), as
shown in Figure 19.
Finally, insert the Cable End through the Cable End Stop Ball and attach the Cable Core, as completed during Step 18.
21
Assembly Manual