Install Pulley Arms/Slider Pulleys - Bowflex Xtreme 2 se Assembly Manual

5. Install pulley Arms
parts:
• Right Pulley Arm (12)
• Left Pulley Arm (13)
• Main Assembly
Hardware:
•
2 Threaded Studs 1/2" X 9 1/2" (M)
• 4 Nylock Nuts 1/2" (N)
• 4 Washers 1/2" (D)
Tools: 7/32" Hex Wrench, Rubber Mallet
5-1
Align the two holes in the Pulley Arms with those
in the Lower Lat Tower Assembly and secure using
threaded studs, 1/2" washers and nuts as shown.
6. Install Slider pulleys
parts:
• 2 Slider Pulleys w/ Decal (14)
• Main Assembly
Tools:
3/16 Hex Wrench
6-1 Install a Slider Pulley onto each Pulley Arm as
shown.
6-2
Choose any of the four holes to secure.
N
D
M
14
10
Assembly Manual
12
13
N
D
14