Squat Attachment - Bowflex Ultimate 2 Assembly Instructions Manual

Installing Your Bowflex Ultimate
Install Squat Attachment
1. Make sure the Seat T Handle is Locked in position on
the Seat Rail. (See Figure A)
2. Fold Seat Rail up and insert Squat Holder into the
Round Hole on the Seat Rail. Make sure the Squat
Holder locks securely into Seat Rail. (See Figure C )
3. Hook the lower Hook on the Squat Attachment up
onto the lower Post on the Seat Frame.
4. Rotate Squat Attachment up until it locks into place.
(See Figure D)
(Continued on page 33)
Seat Rail
Figure B

Squat Attachment

Lower Hook
Seat Frame
™ 2 Squat Attachment
Seat T Handle
Squat Holder
Seat Rail
Round Hole
Rotate Up
Figure D
Locked
Unlocked
Figure A
Figure C
Lock Into Place
32