Smart Thermostat (Transmitter Operation); Comfort Fan Speed Control - Pacific energy BROADWAY Installation And Operating Instructions Manual

Smart Thermostat (Transmitter Operation)

The Smart Thermostat function adjusts the ame height in accordance to the difference between the set point
and the room temperatures. As the room temperature gets closer to the set point, the Smart Function will
modulate the ame down. If the room temperature is cool, the Smart Function will modulate the ame up. To
activate this function, press the THERMOSTAT key (Figure 1) until the word "SMART" appears to the right of
the temperature icon (Figure 11). To adjust the set point, press the up or down arrow keys until the desired set
point temperature is displayed on the LCD screen of the remote transmitter (Figure 12).
Figure 11: Smart ame

Comfort Fan Speed Control

If the Heater is equipped with a hot air circulating fan, the speed of the fan can be controlled by the Pro ame
2 System. The fan speed can be adjusted through six (6) speeds. To activate this function use the Mode Key
(Figure 1) to index to the fan control icon (Figure 13). Use the Up/Down Arrow Keys to turn on, off or adjust
the fan speed (Figure 14). A single "beep" will con rm reception of the command.
Figure 13: Comfort fan HI.
BDWY.BODYB
230216-44
BRNT.BODYB
control.
Figure 12: Smart ame
function set low.
Figure 14: Comfort fan off.
11
5055.66-B