Post Tender; Currency Conversion - Sam4s ER-430M Operation And Program Manual

Post Tender

Post tendering means computing change after the sale has been totaled and the drawer is open. This
feature is useful when a customer changes the amount of the tender or when a "quick change artist"
confuses a clerk. Normally, this function is not allowed. If you wish to allow post tendering, you must
set the appropriate system option.
1. Register the items you wish to sell.
2. Press CASH:
C AS H
3. The display will indicate the total of the
cash sale.
4. Enter the amount of the new tender,
Press CASH:
5. The display will indicate the change due.

Currency Conversion

If you normally accept currency from neighboring nations, you can program to convert the subtotal of
a sale to the equivalent cost in the foreign currency. You can set up four separate conversion
functions for different foreign currencies. To do this, you need to program the conversion factor. For
example, if the US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency), the
conversion factor is 1.3720. See "Function Key Programming" in the "Program Mode Programming"
chapter to set a conversion factor.
1. Register the items you wish to sell.
2. Press the CONV1 key if it is located on
the keyboard:
CONV1
3. Enter the amount of the foreign currency
tender, Press CASH:
4. The display will indicate the amount of
foreign currency tendered and display
$5.17 change due. The change due is
computed in home currency!
ER430M Electronic Cash Register AU
2 0 0 0
1 0 0 0
Receipt Example:
DATE 15/01/2003 WED
PLU1 T1
GST
CASH
CLERK 1
CAS H
Receipt Example:
DATE 15/01/2003 WED
PLU1 T1
GST
TOTAL
CONV 1
CHANGE RATE
HOME AMT.
CAS H
CHANGE
CLERK 1
The currency symbol you program
will display here. See "Print Option
Programming" in the "Program
Mode Programming" chapter.
THANK-YOU
CALL AGAIN
TIME 08:33
$2.00
$0.12
$2.12
No.000011 00001
THANK-YOU
CALL AGAIN
TIME 08:33
$2.00
$0.12
$2.12
¥2.90
@1.3720
$10.00
$5.17
No.000011 00001
Operating Instructions • 53