Program 910 - Group Descriptors Programming - Sam4s ER-430M Operation And Program Manual

Program 910 - Group Descriptors Programming

Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select 'No' in system
option #25 (See "System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 9 1 0, press the SBTL key.
9
3. Enter the number of the group you wish to program; press the X/TIME key.
4. If you are programming using alpha overlay,
Type up to 18
descriptor keys
or,
Enter up to 18
three-character codes
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
CASH
154 • Contents
1 0 SBT L
X/T IME
SBTL
SBTL
ER430M Electronic Cash Register AU