Danfoss ECL Comfort 210 Operating Manual page 20

Operating Guide
Advice for settings:
A247.3, ex. c
Circuit 2 must be able to receive the heat demand from circuit 1.
Issue:
Heating circuit (1):
Heat demand
DHW circuit (2):
Heat demand
* This value is added to the heat demand value from circuit 1.
DHW circulation pipe can be connected to the DHW tank at 'A'
for internal circulation or to the heat-exchanger at 'B' for external
circulation.
Issue:
DHW circuit (2):
Internal DHW circulation
DHW circuit (2):
External DHW circulation
A347.3, ex. a
No special settings required.
20 DEN-SMT/DK
ECL Comfort 210 / 310, application A247 / A347
Navigation:
MENU \ Settings \ Application: 'Demand offset'
MENU \ Settings \ Application: 'Demand offset'
Navigation:
MENU \ Settings \ Application: 'Cont. T control'
MENU \ Settings \ Application: 'Cont. T control'
ID no.:
11017
12017
ID no.:
12054
12054
VI.LG.S3.02
Recommended
setting:
OFF
3 K*
Recommended
setting:
OFF
ON
Danfoss District Energy