Danfoss ECL Comfort 210 Operating Manual page 106

Operating Guide
MENU > Settings > Tank temperature
Charge difference
Circuit
All
Set the number of degrees above the desired DHW temperature that will
result in the DHW heating (charging) temperature.
* See Appendix "Parameter ID overview"
Value: Number of degrees to be added to the desired DHW
temperature to obtain the DHW heating (charging)
temperature.
106 DEN-SMT/DK
ECL Comfort 210 / 310, application A247 / A347
1x193
Setting range Factory setting
* *
=
X Time
# 1 # =
Charging difference (ID 1x193)
# 2 # =
Desired DHW temperature
# 3 # =
Start difference (ID 1x195)
# 4 # =
Actual DHW temperature
# 5# =
DHW heating / charging activity
The desired DHW temperature is related to the tank temperature
sensor.
If two tank temperature sensors are installed, the relation is to the
upper tank temperature sensor.
VI.LG.S3.02
Danfoss District Energy