System - Danfoss ECL Comfort 210 Operating Manual

Operating Guide

6.8 System

6.8.1 ECL version
In 'ECL version' you will always be able to find an overview of the
data related to your electronic controller.
Please have this information available if you need to contact your
Danfoss sales organization concerning the controller.
Information about your ECL Application Key can be found in 'Key
functions' and ' Key overview' .
Code no.:
Hardware:
Software:
Serial no.:
Production week:
6.8.2 Extension
ECL Comfort 310 only:
'Extension' will offer you information about additional modules, if
any. An example could be the ECA 32 module.
6.8.3 Ethernet
The ECL Comfort 310 (only) has a Modbus/TCP communication
interface that allows the ECL controller to be connected to an
Ethernet network. This allows remote access to the ECL 310
controller based on standard communication infrastructures.
In 'Ethernet' it is possible to set up the required IP addresses.
6.8.4 Portal config
The ECL Comfort 310 (only) has a Modbus/TCP communication
interface that allows the ECL controller to be monitored and
controlled via the ECL Portal.
ECL Portal related parameters are set here.
Documentation for ECL Portal: See http://ecl.portal.danfoss.com
124 DEN-SMT/DK
ECL Comfort 210 / 310, application A247 / A347
The Danfoss sales and order no.
for the controller
Hardware version of the
controller
Software version of the
controller
Unique number for the
individual controller
Week no. and year (WW.YYYY)
Example, ECL version
VI.LG.S3.02
Danfoss District Energy