Control Throw Deflection Table - AeroWorks .90-1.20 YAK 54 ARF-QB Assembly Manual

6. Elevator throw measured in degrees. Locate
throw meter at widest point of the elevator.

Control Throw Deflection Table

Low Rate
Aileron 1 1/2" or 18˚ up
1 1/2" or 18˚ down 1 3/4" or 30˚ down
Rudder 1 1/4" left
1 1/4" right
Elevator 1" or 12˚ up
1 1/4" or 14˚ down 1 1/2" or 20˚ down
More down elevator throw is
recommended this will
give the pilot the same stick feel in either
upright or inverted flight.
For 3D flying use the following throws:
3D Rate
Aileron 2 1/2" or 35˚ up
2 1/2" or 35˚ down
Rudder 2" left
2" right
Full rudder deflection is typically
recommended for all out 3D
Elevator 3 1/2" or 45˚ up
3 1/2" or 45˚ down
Recommend Expediential:
15% expediential on low rates
30% expediential on high rates
60% expediential on 3D rates
Use the given rates as a starting point. Then
adjust rates from there to suit your own
73
High Rate
1 3/4" or 30˚ up
1 1/2" left
1 1/2" right
1 1/4" or 18˚ up
flying style.