Mounting The Unit In A Rack; Connections - Sony PVM-L1700 Operation Manual

Mounting the Unit in a
Rack
To mount the unit in an EIA standard 19-inch rack, use the
supplied rack mount brackets and screws.
1
Remove the four feet from the bottom of the unit.
2
Attach the rack mount brackets to each side of the unit
with the rack mount attachment screws.
Rack mount bracket
3
Screw the rack mount brackets to the rack to mount the
unit.
Use the commercially available screws that match the
size of the rack's holes.
Rack
24
Mounting the Unit in a Rack / Connections
PVM-L1700
Rack mount
attachment screws

Connections

Note on connecting the cable to the DC 5V OUT
connector
Be sure to plug the male connector of the cable into the DC
5V OUT connector of the monitor.
Insert the connector so as to fit the shape of the DC 5V
OUT connector.
Plug the male
connector into
the monitor.