Cycle Parts Gmbh; Terms Of Guarantee; Technical Spezifications; Troubleshooting - VDO X1 Instruction Manual

D D GB GB F I

6. Terms of guarantee

VDO Cycle Parts grants a guarantee of 5 years
from the date of purchase for your VDO computer.
The guarantee covers material and processing de-
fects on the computer itself, on the sensor/trans-
mitter and on the handlebar holder. Cables and
batteries as well as assembly materials are excluded
from the guarantee. The guarantee is only valid
if the parts concerned have not been opened
(exception: battery compartment on the compu-
ter), no force has been used and there is
no sign of wilful damage.
Please take care to keep the receipt as it must
be presented in the event of a complaint.
If the complaint is justified, you will receive a
comparable replacement appliance from us.
You are not entitled to an identical replacement
model if the model in question is no longer in
production due to a change of model.

7. Technical spezifications

Computer:
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Handlebar holder:
weight: approx. 15 g
Sensor:
weight approx. 20 g
Computer battery:
3V, type 2032
Battery life-span:
1200 cycling hours, approx. 24,000 km (15.000 M)
36 X1
Please contact the dealer from whom you
purchased the device for all complaints and
guarantee claims. Or send your complaint
directly to:

Cycle Parts GmbH

Große Ahlmühle 33
D-76865 Rohrbach (Germany)
We would be pleased to answer any technical
questions you might have at the following
hotline number:
+49 (0) 63 49 - 96 35 - 10.
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in
the course of further development.
Working temperature of the display:
-15 °C to +60 °C
Speed range:
for wheel size 2155 mm, min 2.5 km/h,
max 199.5 km/h
Ride time measurement range:
up to 23:59:59 HH:MM:SS
Day's trip counter measurement range:
up to 999.99 km or mi
VDO CYCLECOMPUTING
Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi

8. Troubleshooting

Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause
Half segments on the display Computer software not running
(e.g. after a battery change) correctly after battery change
No speed display Distance from sensor to
magnet too big
No speed display Computer not properly clicked
in the handlebar holder
No speed display Wheel circumference is not
correctly set or is at zero
Display becomes weak Battery dead
Display becomes weak Temperatures under 5° make
the display sluggish
www.vdocyclecomputing.com
I F GB GB
Wheel circumference setting range:
from 100 mm to 3999 mm
(3.9 to 157.4 inches)
Correction
Take out battery and insert
again
Correct position of sensor
and magnet
Place computer head in the
handlebar holder, twist until
it clicks
Set wheel circumference
Check battery, replace if nec.
At normal temperatures the
display will work normally
again
X1
D D
37